Roland DG
Cutters
Cut-only vinyl plotters for decals, lettering, heat transfer and masking. If you also need to print, the printer/cutters do both on one machine.
GS2-24
A 24-inch desktop cutter that handles the everyday work of a sign shop: decals, window lettering, heat transfer vinyl, paint masks and sandblast stencils. A digital servo motor and 500 gf of blade force cut thin vinyl and thick reflective stock on the same machine. CutStudio and the Illustrator and CorelDRAW plug-ins are included.
- Cut width24 in.
- DriveDigital servo
- Blade force30 to 500 gf
- SpeedUp to 850 mm/s
What it cuts
Roll or sheet material up to 24 inches wide.
Contour-cut vinyl for windows, doors, vehicles and equipment. Print-and-cut graphics need a printer/cutter.
Solid-colour lettering and logos in cast or calendered vinyl, weeded and taped for application.
Cut HTV for shirts, bags and uniforms; mirrored in the driver and pressed with a heat press.
Masking film for painted signs, boards and walls, cut to the artwork and removed after painting.
Thick sandblast resist for glass and stone, cut with the higher downforce settings.
What you need with it
A cutter is only as good as its blade. These are the consumables that keep it cutting clean.
45 degree for vinyl and HTV, 60 degree for thick or reflective stock. Two-pack and five-pack.
Shop blades →XD-CH3 standard holder or the adjustable alloy XD-CH4 in blue, orange and red.
Shop holders →The sacrificial strip the blade cuts against. Replace when scored to keep cuts clean.
Shop cutter pad →Cast and calendered sign vinyl, HTV and specialty films by the roll.
Shop media →A cut-only machine handles solid-colour vinyl. For full-colour decals, wraps and labels you need a printer/cutter. The BN2 Series prints and cuts on one bench-top unit.
Also in Roland DG
Blades and cutting strips ship the same business day on orders before 2 PM ET.