PS-10 Rotary Numbering System

Description

PS-10 Rotary Numbering System

The ultimate high production rotary numbering system.

Air feed “Bottom Suction” Rotary number, perf, and score machine. Equipped with (1) Holding ring w/ cam finger ,(1) straight 7 wheel rotary printhead, (1) perf and (1)score assembly. Oscillating ink system standard.

Up to 24 heads
Oscillating ink roller system
Large split holding ring
Electronic repeat: 0-99
Print position adjustment
Simplified controls
Sheet counter. Factory installed, 8 digit LCD
Automatic bottom-of-pile air suction feed
Top loading for continuous operation and greater productivity

Features	Advantages
Speed: Up to 20,000 sheets per hour	Higher production levels, depending on job requirements
Number of heads: Up to 42	Increase productivity. Multiple up numbering in a single pass. (Numbering speed is not affected by the number of printheads.)
Oscillating ink roller system	Superior image quality. Economical – use the ink off you shelf or match to MPS color.
Large split holding ring (18.86″ cir)	Full bleed 11″ x 17″ and A3 – Flexible number replacement
Electronic repeat: 0-99	Adaptability – put the same number on consective sheets.
Print position adjustment	Fast, easy set-up – adjust number on the run.
Simplified controls	User friendly operation – all easily accessible.
Sheet counter	Factory installed, 8 digit LCD
Automatic bottom-of-pile air suction feed	Top loading for continuous operation, greater productivity
Base with 3 individual pumps	Seperate pumps control the pneumatics, vacuum, and sheet separation air flow, all contained in base unit.
Lift out perforating, scoring, slitting assembly	Combine any/all operations for one pass finishing with true professional results. Large selection of blades.
Impression adjustment	Precise pressure adjustment from single sheet to multiple sets. Independent side-to-side.
110V Standard (220V optional)	110V plug-in and run, no special wiring required.

Specifications
Size	62″L x 32″ W x 48″ H (1575mm x 813mm x 1220mm)
Weight (Net)	370 lbs. (169kg)
Sheet Size	Min. 4 1/2″ x 5″ (114mm x 127mm), Max. 17 1/2″ x 23″ (445mm x 585mm)
Power Requirement	110/1 standard, other voltages optional
Speed	Numbering up to 10,000 sheets per hour – perf, slit, score only up to 20,000 sheets per hour.
Number of Heads	Up to 7 straight or 5 convex per holding ring – Max. 42
Number of Holding Rings	Up to 6
Minimum Spacing Between Heads on Same Holding Ring	1.82″ parallel (46mm) 2.75″ Convex (70mm)
Maximum Spacing Between Heads on Same Holding Ring	17″ parallel (432mm) 16.1″ Convex (409mm)
Minimum Spacing of Adjacent Parallel Heads	2.875″ (73mm)
Minimum Spacing of Adjacent Convex Heads	2.375″ (60mm)
Specifications are subject to change without notice Worldwide patents pending	MADE IN U.S.A.