54" & 64" Print/Cut — VG4-540 & VG4-640
The TrueVIS VG4 Series is Roland's balance of image quality and running cost. Enhanced TR3 red widens the gamut, ink consumption drops by up to 35% against the VG3, and a smart take-up system keeps long runs going unattended. Choose 54 or 64 inches.
Ink is the recurring cost on a print/cut machine, and the VG4 uses up to 35% less of it than the VG3 for comparable output. Over a year of production that changes the cost per square foot more than headline speed does.
TR3 red is stronger than the previous generation, widening the gamut for brand colours that used to sit out of reach. Four ink configurations are available, including one with double white for clear and coloured media.
The take-up system ships as standard rather than as an option, so long runs can finish without someone watching the roll. Direct-to-printer operation and integrated print-and-cut cut steps out of the workflow.
Eco-solvent print and cut on roll media to 54 or 64 in. wide, with up to 35% lower ink use than the VG3.
Build the graphic and cut path, then send the job through VersaWorks. Variable data and tiling workflows are supported.
Roll media loads onto the dedicated stand, and the take-up system manages the roll as the job runs.
The VG4 prints, cures through the heater and dryer, then contour cuts — including perforated sheet separations.
Roland DG Connect reports ink use and cost per print, so the savings show up as numbers rather than claims.
The VG4 series runs TrueVIS TR3 ink in 500 ml pouches.
Genuine Roland DG parts for the VG4 Series. Prices in USD and CAD on each listing.
Head Wiper CG2183 (LG)
Cap Top Assembly SV CG2266
Media Clamp Plate R2 CG2191 (Right)
Media Clamp Plate L2 CG2191 (Left)
OLFA XB10 Cross-Cut Blade, 25-Pack
45° / .25 Offset Blade, 1 ea. – All Purpose
45° / .25 Offset Blade, 3-Pack – All Purpose
45° / .25 Offset Blade, 5-Pack – All Purpose
60° / .10 Offset Blade, 1 ea. – Thick Materials
60° / .10 Offset Blade, 3-Pack – Thick Materials
25° / .125 Offset Blade, 5-Pack – Thin Materials
45° / .25 Offset Premium Blade, 2-Pack – Standard Materials
45° / .25 Premium Blade, 5-Pack – All Purpose
45° / .25 Premium Blade, 5-Pack – Standard Materials
60° / .50 Premium Blade, 5-Pack – Sandblast
60° / 1.00 Premium Blade, 5-Pack – Thick Materials
55° / .5 Offset Blade, 2-Pack – Window Tint
Blade Holder, Adjustable Tip, Regular
Blade Holder, Adjustable Tip, Alloy — Blue
Blade Holder, Adjustable Tip, Alloy — Orange
Blade Holder, Adjustable Tip, Alloy — Red
Width. The VG4-540 takes media 295 to 1,371 mm (11.7 to 54 in.) and prints to 1,346 mm; the VG4-640 takes 335 to 1,625 mm (13.2 to 64 in.) and prints to 1,600 mm. The 640 also handles heavier rolls, 45 kg against 35 kg. Print engine, ink and resolution are the same.
It is Roland's figure against the VG3 for comparable output, and ink is the dominant recurring cost on these machines. Roland DG Connect reports your actual consumption, so you can check it against your own work rather than take the claim on trust.
Yes, it ships as standard on both models, along with the dedicated stand and media holders. That matters for unattended runs, where an unmanaged roll is what usually stops the job.
The seven-colour setup with double white — CMYK plus orange, red and two white channels. Two eight-colour options are available instead when you want the widest gamut on white media.
The XG-640 is the higher-throughput professional machine, roughly 50% faster than the VG3 and available only at 64 inches. The VG4 targets balance — quality and low running cost — and comes in 54 or 64 inches at a lower price.
Tell us which width suits your work and we'll follow up with pricing, financing options, and lead time for the VG4 Series.